TECHNICAL DATA

- Torque from 5 to 50 Ncm with 1/16 contra angle
- Speed with contra-angle 1/16 from 12.5 to 2,500 rpm
- Direct switch for pump’s activation
- Pump Irrigation liquid flow adjustable from 0 to 100%
- Errors auto-diagnostic system
- Push button for Reverse use
- 4 pre-programmed functions and 10 selectable program settings give a total of 40 operating modes
- Available functions:
   FORA = drilling
   ALES = finishing
   IMPL = implant
   PROT = prosthesis
- Contra angle auto-calibration upon machine’s activation
- Speed variable through the multifunctional pedal control (available on request)
- The machine is supplied with preset modes in terms of programs and functions. All parameters can be modified by operator, as described in the instructions manual
Important: once the parameters have been modified, the pre-set mode can only be manually reacquired
- Electronic control with re-programmable microprocessor
- Power consumption: 170 Va
- Weight: Kg. 4,1
- Dimensions: (DxWxH): mm 250x230x125


The entire system conforms toEC regulations and is covered by a full guarantee and all risks insurance